THE NEXT GENERATION FUEL ADDITIVE
CleanFire is the new industry standard in fuel additive technology. Period.
Cleanfire was born of a need.
When we surveyed the available diesel fuel additives that were on the market we came away unimpressed. We found lots of products that did lots of things, but nothing that did it all in one bottle. So we set out to make a premiumfuel additive for year round operation. You no longer need to carry several products to treat your diesel fuel as CleanFire offers an impressive array of benefits that others simply can't match.
CleanFire was specifically formulated to protect your engine from the Ultra Low Sulfur Diesel (ULSD) fuels lack of lubricity. Then we added an anti-gel package for winter protection, a detergent package to clean your engine and a stabilizer package to address algae control and water dispersement. For good measure we gave it a cetane boost to give you the power and performance you demand along with easier starting.
Too many products address just seasonal needs, but CleanFire should be at the heart of your preventative maintenance program. CleanFire offers multiple benefits that provide top to bottom protection regardless of the season and is the best investment you can make to ensure that your equipment is on the job and working for you.
We invite you to explore our website and learn more about Cleanfire and all it has to offer. We're confident that once you try it you'll agree that it's the best diesel fuel additive you've ever used.
Ultra-low sulfur diesel (ULSD) fuel was required by EPA as the new standard for the sulfur content in on-road diesel fuel sold in the United States starting in late 2006. The allowable sulfur content for ULSD (15 ppm) is much lower than the previous U.S. on-highway standard for low sulfur diesel (LSD, 500 ppm) and considerbly lower than the 5000 ppm of sulfur that was present in fuel prior to October of 1993.
The process used to reduce the sulfur also reduces the fuel's lubricating properties. Lubricity is a measure of the fuel's ability to lubricate and protect the various parts of the engine's fuel injection system from wear. The processing required to reduce sulfur to 15 ppm also removes naturally-occurring lubricity agents in diesel fuel. In practice most fuel is closer to 5 ppm as refiners try to keep costs down as much as possible.
This has led to a fuel that is much drier and, along with loss of lubricity, it has also decreased cold weather protection, increased the amount of water in diesel fuel (leading to a improved algae environment) and has decreased the shelf life dramtically (in some cases fuel begins to degrade in as little as 28 days). Due to it's lower cold weather protection more operators have had to use #1 diesel to keep equipment running which has made a bad situation even worse since #1 diesel is even drier than ULSD #2 diesel fuel. CleanFire gives you the advantage of keeping the power, performance and operability you are accustomed to when running #2 diesel, but with the cold weather protection of #1---all at a lower price due to the reduced amount of #1 you will have to run.
Add to this that some refiners add in additives and some do not so that they can keep their costs as low as possible and you end up with a perfect storm of problems when it comes to using a consistent blend of diesel fuel that works as it should.
We encourage you to click on the Benefits and Learn More tabs to see how CleanFire can address the problems described above. For more information feel free to visit the follow site:
CleanFire is a highly concentrated multifunctional fuel additive
Cetane Package
Boost Cetane up to 6 numbers -
engines start easier & faster
Increase power
Improved fuel economy
Smoother running engine
(no more "diesel knock")
More complete fuel combustion
Reduce emissions and black exhaust smoke
Anti-Gel Package
Strong anti-gel for winter protection
Reduce Cold-Filter Plug Point (CFFP) by I5°F with single dose
Reduce the amount of #1 diesel needed in cold weather
Detergent Package
Cleans injectors & valves
Cleans tanks & fuel lines
Lowers regeneration occurrences
Stabilizer Package
Disperses water to 1 micron
(safe size for all engines)
Inhibits Algae Growth
Extend fuel storage life
Lubrication Package
Lubricates fuel delivery system
(pump, injectors, top piston ring)
Reduces wear caused by
Ultra Low Sulfur Diesel (ULSD)
CleanFire shows a clear improvement in cetane levels which provides you with the power you need to get the job done.
Fuel consumption is lowered when CleanFire is used. Not only do you break even or better on fuel costs, you also protect your valuable equipment.
This graph illustrates a typical result for potential fuel savings over a 10 hour period.
These results show the Cold Fire Plug Point of CleanFire when blended in different quantities and with different fuels.
We took two samples of diesel fuel and treated one with CleanFire and left the other untreated. The results speak for themselves.
Winter is by far the most crucial season when it comes to diesel fuel. Look for yourself to see the dramatic improvement CleanFire makes!
More power, more performance, more protection, less fuel costs.
The choice is clear when you look at the costs and the benefits gained.
It doesn't take much for CleanFire to pay for itself and more!
Have your own story? Send it
to us and we'll send you a
CleanFire hat as a thank you!
Dear CleanFire,
I’'ve been using CleanFire for the last 10,000 miles in my 2007 Dodge Ram Cummins and I’'ve had great results with it.
First, I have not had one drop of water purged from the fuel filter since I started using Clean Fire, where before I would always have some amount of water when I would periodically drain it. My engine runs noticeably smoother than before, and I’ve seen about a 2mpg increase in fuel mileage. I plan on running up at least 500,000 miles on this truck, and I’m convinced Clean Fire is a premium additive that will get me there.
Sincerely,
Seth
We put the CleanFire diesel additive in four trucks. Two of the trucks, we put the CleanFire diesel additive in immediately, the following month we ran without the Cleanfire diesel additive. The other two trucks, we did the opposite, tracking the fuel economy in all of these trucks to establish a baseline of fuel economy. This took into consideration any seasonal related impacts to the analysis. Overall, the average fuel consumption reduction for the CleanFire diesel additive was 3.6%
Scott
We have been using CleanFire for the last two construction seasons. We have treated over 200,000 gallons with Clean Fire. We performed field tests with straight fuel, Clean Fire, and another additive during the 1st season. Clean Fire improved fuel economy in all of our tests. The other product performed worse than straight fuel. We have since then repeatedly tested Clean Fire against straight fuel and the results were the same, improved fuel economy with Clean Fire. In our latest test in November 2008, we ran a MT865B Cat Challenger with twin Noble 17CY scraper pans. The machine has a 510 HP Cat C18 ACERT Tier 3 engine. The machine has an onboard computer system that records fuel consumption and load along with other technical information. The machine had the same operator and the same working conditions throughout the test. With straight #2 off-road diesel the machine used 18.35 gallons/hour. With Clean Fire added to the same fuel the machine used 16.23 gallons/hour. Your additive improves economy period! We use Clean Fire exclusively for winter protection anti-gel. We are located in northeast Nebraska. We do not buy #1 fuel, only straight #2. On December 22, 2008 we started up two pickups (2006 and 2007 Chevy Duramax Diesel) that had #2 and Clean Fire in the tanks and were left outside in the open. The air temperature was -16 degrees below zero. The pickups both started fine, idled until warmed up, and ran down the road without any problems.
Pruss Excavation
We are a proud member
of the Nebraska Trucking Association
Please fill out the contact form before your purchase so that we can contact you in the event we have questions about your order.
If you have purchased CleanFire prior to 12/31/09 please indicate where you purchased it and, because we're the curious type, let us know where you heard about us. Please rest assured that we will not share your information with third parties and that your privacy is very important to us.
Case of Two 2.5 gallon containers. Treats 7,500 gallons/$375.00 (.05 cents per gallon treated)
Buy In Gallons
Case of Twelve Quart containers. Treats 4,500 gallons /$324.00 (.072 cents per gallon treated)
Buy In Quarts
Shipping is included in all prices. Nebraska residents are subject to state and local taxes.
Looking for individual quarts or gallons? Click here to view our dealer list!
Latest Industry News
Click here to visit The Log Book blog!
It's a great place to learn more and to let your voice be heard!
Our driving principle is simple:
Produce the best product on the market and back it up with unrivaled customer service. We strive to provide you with a product that simply works and gives you the peace of mind that can only come when you know that you and your equipment are properly protected.
CleanFire is proudly made in the United States in our manufacturing facility in Osteen, Florida.
Sales and Marketing are handled by Cleanfire Distributing, LLC in Dodge, Nebraska.
The Log Book
2010 PowerPoint
Presentation
MSDS
Cost Comparison
Click on the envelope to e-mail us at cleanfire_zoho.com
Click to call us at (888) 892-1811
cleanfirediesel (AIM)
Click on the icon to follow us on Twitter!
twitter.com/cleanfire
Would you like to keep up with the latest promotions?
Join our mailing list!
Click on the logos above to view store locations
clean fire cost comparison
